Furnaces

  

Diamond 95 Ultra - Diamond 90 - Diamond 80
 

Air Conditioning

  

Stealth - Stellar - Olympian

  
 
Diamond® ULTRA Series High Efficiency (PXU-V)
The York Diamond® ULTRA high-efficiency gas furnace eliminates the trade-off of economy for dependable, reliable performance. Or, the choice between quiet operation and even, whole-house heating. At 94% and 80% AFUE, a new York Diamond ULTRA gas furnace allows customers to slash operating costs as much as 60%, while keeping operating sounds to a mere whisper. These furnaces circulate more air throughout the home for longer periods of time, reducing stratification from room-to-room and floor-to-floor. Longer run cycles can improve air quality by improving air filtration. The secret is York two-stage, variable-speed furnace engineering. It’s a York engineering achievement providing unparalleled home comfort and operational economy.
 
Special Benefits
  • Two-stage heating operation includes: two-stage gas valve, two-speed inducer operation, and variable-speed blower operation.
  • Install it as two-pipe (sealed combustion) or single-pipe vent (using indoor combustion air).
  • Top intake and vent connection allows installation in narrow locations.
  • Insulated blower compartment.
  • No special vent termination kit required.
  • Full-height blower compartment allows side- return application with no return air box.
  • Field selectable continuous fan speed.
  • Low unit amp requirement for easy replacement application.
  • Ignition control supports 24 or 120 volt circuit outputs.
  • 24V, 40VA control transformer and blower relay supplied for add-on cooling.
  • Hi-tech tubular aluminized steel primary heat exchanger.
  • Secondary (condensing) heat exchanger of 29-4C high-grade stainless steel.
  • Variable-speed blower motor with 12 cooling CFM selections.
  • Electronic hot surface ignition saves fuel costs, increases dependability and reliability.
  • Two-speed induced combustion system with Inshot main burners for quiet, efficient operation.
  • Adjustable 10-, 15-, 20-minute delay timer allows two-stage operation with single-stage thermostat.
  • Timed-on, adjustable-off blower capability for maximum comfort.
  • Blower-off delay for cooling SEER improvement.
  • Built-in, high-level self-diagnostics with fault code display.
  • 100% shut-off main gas valve and blower door safety switch for extra security.

 

  
 
   
Diamond® Series High Efficiency (PUR)
This condensing gas furnace series features ratings as high as 94.3% AFUE, long-lasting tubular primary heat exchanger, low-level combustion sound, and a proven integrated computerized control system. All Diamond® Series furnaces have been equipped with added safety features, as well as easy access for add-on cooling products. All components are enclosed in a corrosion-resistant, pre-painted steel cabinet.
 
Special Benefits
  • Install as two-pipe (sealed combustion) or single-pipe vent (using indoor combustion air), 90+ models.
  • Top intake and vent connection allows installation in narrow locations.
  • No special vent termination kit required.
  • Full-height blower compartment allows side return application with no-return air box.
  • Low unit amp requirement for easy replacement application.
  • 24V, 40VA control transformer and blower relay supplied for add-on cooling.
  • Easily connected power/control wiring.
  • Compact, easy-to-install, ideal height 45" cabinet, 90+ models.
  • Solid bottom with removable panel allows easy application.
  • Hi-tech tubular aluminized steel primary heat exchanger.
  • Secondary (condensing) heat exchanger of 29-4C high-grade stainless steel, 90+ models.
  • Electronic hot surface ignition saves fuel costs, increases dependability and reliability.
  • Induced combustion system with Inshot main burners for quiet, efficient operation.
  • Timed-on, adjustable-off blower capability for maximum comfort.
  • Blower-off delay for cooling SEER improvement.
  • Built-in, high-level self-diagnostics with fault code display.
  • 100% shut-off main gas valve and blower door safety switch for extra safety.
  • Protection from intake, exhaust, and condensate blockage.
  • Diamond Tough™ hot-surface ignition.
  • Integrated control module for reliable, economical operation.
  • PSC multiple-speed, direct-drive motor with large, quiet blower.
  • Easy access from front of unit for cleaning, maintenance, or service.
  • High-velocity filter provided for field installation.

 

  
 
Diamond® Series Mid Efficiency (PDN)
This induced combustion gas furnace series features 80% AFUE, long-lasting tubular primary heat exchanger, low-level combustion sound, and a proven integrated computerized control system. All Diamond® Series furnaces have been equipped with added safety features, as well as easy access for add-on cooling products. All components are enclosed in a corrosion-resistant, pre-painted steel cabinet.
 
Special Benefits
  • Top vent connection allows installation in narrow locations.
  • Full-height blower compartment allows side return application with no-return air box.
  • Low unit amp requirement for easy replacement application.
  • 24V, 40VA control transformer and blower relay supplied for add-on cooling.
  • Easily connected power/control wiring.
  • Compact, easy-to-install, ideal height 40" cabinet.
  • Solid bottom with removable panel allows easy application.
  • Hi-tech tubular aluminized steel primary heat exchanger.
  • Electronic hot surface ignition saves fuel costs, increases dependability and reliability.
  • Induced combustion system with Inshot main burners for quiet, efficient operation.
  • Timed-on, adjustable-off blower capability for maximum comfort.
  • Blower-off delay for cooling SEER improvement.
  • Built-in, high-level self-diagnostics with fault code display.
  • 100% shut-off main gas valve and blower door safety switch for extra safety.
  • Protection from intake, exhaust, and condensate blockage.
  • Diamond Tough ™ hot-surface ignition.
  • Integrated control module for reliable, economical operation.
  • PSC multiple-speed, direct-drive motor with large, quiet blower.
  • Easy access from front of unit for cleaning, maintenance, or service.
  • High-velocity filter provided for field installation.

 

  

 
Stealth™ Series Super High Efficiency (HTS)
The York® Stealth™ Series is an exclusive line of up to 16.2 SEER air conditioners proven to lower operating costs as much as 40%, while delivering better humidity control, reduced air stratification, and sound levels designed to be the quietest in the industry.
The series is engineered using the revolutionary Bristol® Twin-Single™ compressor. This unique design handles larger cooling and heating requirements by allowing two pistons to operate in the forward direction. For smaller air comfort requirements, the compressor is reversed and one piston remains idle. As a result, the compressor provides two capacities more effectively than conventional two-speed or even variable-speed compressors.
 
Special Benefits
  • Exclusive York Comfort Enhancer Control™ reduces conventional start/stop cycles by up to 74% and memorizes last run cycle to adjust starting sequence for enhanced temperature and humidity regulation.
  • Integrated anti-short cycle delay protects against short cycling, while a built-in brown-out protection device prevents harmful low-voltage operation.
  • Pressure switch inputs guard against the loss of charge and high head pressure.
  • Flashing York Beat™ feature constantly monitors itself for proper operation, while a diagnostic LED displays four different flash codes for easy servicing.
  • Special York Sound Silencers™ meet the goal of making the Stealth Series the quietest in the industry.
  • Distinctive contemporary design, appliance-quality 80-gloss finish, and new “champagne” color.
  • A tough powder coating, bonded to primered pre-painted steel, resists rust and corrosion for years. High-strength coil guards look great while protecting coil fins against impact.
  • Each unit provides true 100% nominal capacity ratings, solid-core filter-driers to protect the compressor, high/low pressure switches, and factory-installed Schrader® ports fitted prior to the filter-drier to measure pressure drop.
  • Large service panels allow unhampered access on 2-1/2, 3, 3-1/2, 4 and 5 Ton.
  • All York branches and distributors offer special factory training on Stealth Series’ installation, maintenance, and service.

 

  
   
 
Stellar® 2000 ECO² Series High Efficiency (HAH)
The York Stellar® 2000 ECO² Series is the preeminent line of residential central air conditioning systems in the HVAC industry. As with all York condensing units, the HAH models are designed to be custom-matched with a York evaporator section. Matching air handlers are available for upflow, downflow, and horizontal applications. Electric heaters and add-on coils are also available.
Throughout the entire line, the York Stellar Series enjoys a reputation for uncompromised quality in design, engineering, and manufacturing. It is a standard earned through the satisfaction of millions of homeowners and other customers throughout the world.
When customers demand dependability and unparalleled home comfort, they insist on the York Stellar Series.
 
Special Benefits
  • Contains environmentally friendly refrigerant R410a, a non-ozone depleting refrigerant
  • Coils are constructed of copper tubing with hardened, black-coated aluminum fins for durability and long lasting, efficient operation.
  • Compressor is internally protected against high pressure and temperature through a high-pressure relief valve and temperature sensor.
  • Installation time and costs are controlled by convenient power and control wiring connections, discharge line heat exchanger knockouts, and hard start kits available for non-scroll models.
  • Top discharge allows warm air to be exhausted up and away from the structure and surrounding landscaping to permit compact locations on multi-level applications.
  • Operating sounds are minimized through upward discharge air flow, a rigid top panel to isolate motor sounds, cushioned compressor mounts, and rippled condenser coil fins.
  • Permanently lubricated motor bearings need no annual servicing.
  • Fully exposed refrigerant connections and a single control panel cover make servicing easy.
  • Secured, re-usable service valves are standard equipment on both the liquid and vapor sweat connections for ease of evacuating and recharging.
  • Cabinet is fabricated with special primers and powder-coated finish (champagne color) with 1500 salt spray hours tested.
  • Painted base pan designed to resist rust and corrosion.
  • Field installed Hail Guard available for extreme protection of the condenser coil.
  • Low sound (as low as 70 dB).

 
 
 
 
Olympian® Series High Efficiency (HRA)
The low profile York Olympian® Series is built to the same exacting quality standards demanded of all York equipment, and has earned its own reputation for dependability, quiet operation, and efficiency. Models include:
• Olympian 10 Air Conditioners (HRA)
• Olympian three-Phase Air conditioners (HRA)
As with all York condensing units, the HRA models are designed to be custom-matched with a York evaporator section. Matching air handlers are available for upflow, downflow, and horizontal applications. Electric heaters, Gas and Oil furnaces, and add-on coils are also available.
With efficiency ratings ranging from 10 SEER to as high as 15.3, when matched to a compatible variable-speed air handler, the Olympian Series is the niche line for homeowners in search of highly affordable home comfort, in terms of both initial installed cost and long-term operation. Available in Three-Phase 208/230 and 460 volts. Select from 3, 3-1/2, 4, 5, 6-1/2 and 7-1/2 Ton.
 
Special Benefits
  • Coils are constructed of copper tubing with hardened, black-coated aluminum fins for durability and long lasting efficient operation.
  • Compressor is internally protected against high pressure and temperature through a high-pressure relief valve and temperature sensor.
  • Cabinet is fabricated from pre-painted galvanized steel to resist rust and corrosion. Special primer and desert tan matted finish diminishes fading from sunlight exposure.
  • Installation time and costs are controlled by convenient power and control wiring connections, discharge line heat exchanger knockouts, and hard start kits available for non-scroll models.
  • Top discharge allows warm air to be exhausted up and away from the structure and surrounding landscaping to permit compact locations on multi-level applications.
  • Operating sounds are minimized through upward discharge air flow, a rigid top panel to isolate motor sounds, cushioned compressor mounts, and rippled condenser coil fins.
  • Permanently lubricated motor bearings need no annual servicing.
  • Fully exposed refrigerant connections and a single control panel cover make servicing easy.
  • Secured, re-usable service valves are standard equipment on both the liquid and vapor sweat connections for ease of evacuating and recharging.
  • Plastic coil protection between coil guard and condensing coil.